The secret to keeping tools such as the miter in good condition is preventive care, in this way, you make sure to extend its useful and productive life, whether you use it for DIY projects or for professional jobs, which also prevents losses of unnecessary time and expenses.
Paying attention to the behavior of a miter while it is working is essential to solve problems in time, since it usually shows signs or signs that something may not be working well, such as unusual noise or movement, which is an indication that you should stop it and perform a general review or contact the specialized technical service to prevent serious failures. Let’s look at some basic tips:
- 1 1. Take into account safety procedures
- 2 2. Clean and lubricate its most important parts
- 3 3. Review the user manual for more information
- 4 4. Schedule a time to perform a periodic review
- 5 5. Consider the options of external advice and technical service
- 6 Advantages of preventive maintenance of a miter
1. Take into account safety procedures
To perform the maintenance of a miter machine, the first thing you should do is follow the safety regulations in order to avoid accidents. In this sense, it is important to turn it off and unplug it, in this way you can avoid accidental starts while checking it.
In addition, you should ensure that you wear appropriate clothing and accessories, such as gloves, safety glasses, masks and tight clothing that protect your body, but do not run the risk of being caught by any part of the machine. Therefore, these types of machines usually have parts and pieces that must be handled with care to avoid accidents.
2. Clean and lubricate its most important parts
As with other similar devices, during cleaning and maintenance you should consider removing chips and debris from the different materials used, as well as dust and other waste, for which you can use brushes, cloths or compressed air guns.
However, you should know that not all areas of the miter can be blown, so it could be harmful and cause serious failures in its operation, as in the case of the motor or electrical panel. In this sense, you can clean the ventilation slots or internal areas using a brush with soft bristles and the right size.
The lubrication or greasing is another of the necessary and important points for the maintenance and care of the miter, because this allows the good functioning and optimal movement of its parts. In this regard, it is appropriate to consider the type and amount of lubrication recommended for each machine, since exceeding the amounts could cause failures, malfunction and accumulation of waste in inappropriate places.
3. Review the user manual for more information
To comply with the preventive maintenance of the miter it is necessary to be clear about its design and structure, in this way you will be consequent in case of breakdowns, lost parts or unstable structure. Therefore, it is advisable to read carefully the recommendations and maintenance advice given by the manufacturer in the user manual, in addition, it could indicate the optimal state in which the miter should be.
It is essential to carry out a detailed review of the mounting bolts and nuts, to ensure that they have the precise level of adjustment, since these are the ones that keep the entire structure in the correct position. For this task, you should take into account the illustrations and details of the parts in the manual.
In addition, in case of using special detergents or water, you must avoid that the humidity reaches the interior of the motor or electrical parts, so it is worth remembering that maintenance must be performed externally. In case any liquid touches the inside of the miter ( here you can find some options to buy ), it is important to wait for it to dry completely before turning it on again.
4. Schedule a time to perform a periodic review
Equally important to avoid failures and breakdowns in the miter is to program the frequency with which you perform the inspection and maintenance. To this end, you must design a schedule or calendar with the exact dates on which each review is necessary, always taking into account the working hours of the tool, the last date on which you performed the review and the type of maintenance performed.
Also, it is important to keep in mind that, in the event that the tool is for professional use, not to interfere with the hours of work and production of the tool, to avoid damaging sales and commitment to customers. It is important to note that for this task manufacturers usually offer suggestions of work hours completed for each type of maintenance, as well as formats to help you keep that control.
5. Consider the options of external advice and technical service
In the event that the review and maintenance of the miter is not your strong point or you have doubts about how to do it, you will always have the option to hire the services of a preventive maintenance or repair team, in this way your tools can receive the adequate attention from a specialized technical staff.
This service is generally provided by trained personnel authorized by the manufacturer. However, there is the possibility of hiring professionals in the area who work independently and also provide a quality service. In both cases, the main function will be to make a detailed review of the state of wear of the parts, providing suggestions and recommendations to optimize their use and operation.
Advantages of preventive maintenance of a miter
One of the main advantages is the economic saving , since if the machine is working improperly it is possible that it needs more power and more time of operation to fulfill the same tasks. In addition, with maintenance you can prevent serious failures and loss of money, either by buying spare parts for a deep repair or completely replacing the tool.
Similarly, maintenance extends the life of the machine and prevents the replacement of parts before having fulfilled its stipulated working hours, which gives the miter greater value and allows optimal results in different areas. Also, its good performance provides greater confidence and security, because the risks will be minimal compared to a device in poor condition.
It is worth mentioning that acquiring the most appropriate miter according to the work you are going to perform is another key factor in preventing its malfunction. In this sense, you must ensure that the selected miter has the power, functions and dimensions that you can adapt to your needs.